Ricoh Company Ltd. PRSP35101 Manual De Usuario

8.

Press the [ ] or [ ] key to enter the address, and then press the [OK] key.

IP Address:
   0.   0.   0.   0

Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field,
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.

9.

Use this method to assign Subnet Mask and Gateway Address.

10.

Press the [Menu] key.

11.

If you are requested to restart the printer, turn off the printer, and then turn it back on.

12.

Print a configuration page to confirm the settings made.

• For details about printing the configuration page using control panel, see p.34 "Test Printing".

Receiving an IP Address for IPv4 Automatically (DHCP)

• When you use this printer protocol in the DHCP environment with IPv4 protocol, select [DHCP]

following this procedure.

• When [DHCP] is selected, you cannot make settings for the following items:

• IP Address
• Subnet Mask
• Gateway Address

• Consult your network administrator for information about making network settings.

1.

Press the [Menu] key.

CMC034

4. Configuration

46

rinmei-p2_com_hardware_guide_gb_00060078_eng.xml

4