Ricoh Company Ltd. PRSP35101 Manual De Usuario

8.

Press the [ ] or [ ] key to display [Off], and then press the [OK] key.

DHCP
 Off

9.

Press the [ ] or [ ] key to display [Manual Address], and then press the [OK] key.

IPv6 Config.:
 Manual Address

10.

Press the [  ] [ ] keys to display [Prefix Length], and then press the [OK] key.

Manual Address:
 Prefix Length

11.

Press the [  ] [ ] keys to enter the value, and then press the [OK] key.

Prefix Length:
(0 - 128) 0

12.

Press the [ ] or [ ] key to display [Manual Address], and then press the [OK] key.

Manual Address:
 Manual Address

13.

Press the [ ] or [ ] key to enter the address, and then press the [OK] key.

Manual Address:
0000:0000:0000:

Press the [ ] or [ ] key to enter the left most entry field of the address. After entering the left field,
press the [OK] key, and then you can enter the next field. After completing to enter in the all field,
press the [OK] key.

14.

Use this method to assign Gateway Address.

15.

Press the [Menu] key.

16.

If you are requested to restart the printer, turn off the printer, and then turn it back on.

17.

Print a configuration page to confirm the settings made.

• For details about printing the configuration page using control panel, see p.34 "Test Printing".

Receiving an IP Address for IPv6 Automatically (DHCP)

• When you use this printer in the DHCP environment with IPv6 protocol, select [DHCP] following this

procedure.

Ethernet Configuration

rinmei-p2_com_hardware_guide_gb_00060078_eng.xml

49

4