Casio Computer Co Ltd EXFR200CA Manual De Usuario
80
Using Two Cameras at the Same Time (Multi
Camera Mode)
IMPORTANT!
• In addition to the camera that comes with the controller, you can also register the
camera model below on the controller.
– Separately available EX-FR100CA (available in Japan only) or EX-FR200CA
– Separately available EX-FR100CA (available in Japan only) or EX-FR200CA
digital camera
– EX-FR100 or EX-FR200 camera
Perform the steps below on the second camera before trying to register it on the
controller.
controller.
1.
Charge the camera’s battery (page 19).
2.
Prepare a memory card for the camera (page 30).
To use a second camera, you need to register it on the controller.
. To register a second camera on the controller
1.
If there is a memory card loaded in the second camera, remove it.
2.
On the menu screen, touch the “
¥ Setup” tab.
3.
Touch “Multi Camera”.
4.
Touch “Add”.
5.
Touch “Start” to start registration of the camera.
6.
While holding down the shutter button of the camera you want to
register, hold down [
register, hold down [
p] (Power) for at least one second.
This will cause the operation lamp to flash orange to indicate that camera
registration has started.
When the camera is registered successfully, a message appears and then the
Multi Image screen appears.
registration has started.
When the camera is registered successfully, a message appears and then the
Multi Image screen appears.
Preparing a Second Camera to be Registered on the
Controller
Registering a Second Camera on the Controller