Modern Co. Ltd. TR1003 Manual De Usuario
11
SETTING THE SWING
1. To change the temperature SWING setting, press theTIMER and
“－”
buttons(Fig. 18) at the same timeto display the
current SWING setting (Fig. 17). The letter “S” (looks like Arabic number “5”) means you are currently in the SWING
setting,
setting,
2. Press
the “＋”and “－” buttons
to change the SWING(1, 2 , 3).
3. To store the desired SWING number, press the OK button or wait for 15 seconds without any actions, then transmitter
will accept the setting and become programmed.
will accept the setting and become programmed.
SETTING THE COUNTDOWN TIMER
*1
The TIMER
*1
is available in the ON or THERMO
*2
modes on transmitter (THERMO or ON must be displayed on the
screen).
1. Press the TIMER button (Fig. 18) on the transmitter.The word TIMER
*1
will be displayed and “0:15” minutes (factory
default setting) will be blinking on the screen (Fig. 19).
2. Press
the “＋”and “－” buttons
on the transmitter to set the countdown time. Available countdown time options are 15
minutes, 30 minutes,1 hour (1:00), 1:30, 2:00, 2:30, 3:00, 3:30 ............. 8:30, 9:00.
3. To confirm the TIMER
*1
, press the OK button or wait for 15 seconds without any actions, then transmitter will accept
the setting and become programmed. If the system is cycling in the THERMO
*2
mode + TIMER
*1
feature, it will cycle on
and off, as the room temperature requires until the “time” has expired.
Fig. 19
Fig. 20
CHILDPROOF FEATURE& SETTING
Asafety LOCK feature is available from the TRANSMITTER.
1. To activate the LOCK, press and hold the
“＋”
and TIMERbuttons together for 5-7 seconds. The“CP” will appear in the
ROOM temperature on the screen (Fig. 20). CP word will disappear in one second but the CP lock is activated.
2. To deactivate the LOCK, press and hold the
“＋”
and TIMERbuttons together for 5-7 seconds. The“CP” will disappear
and the transmitter will be unlocked and back to normal operating condition.
NOTE: The CHILDPROOF FEATURE (CP-LOCK) will NOT cancel the operating and cycling of ON, TIMER
*1
, THERMO
*2
.
In order to “TOTAL” lock-out the system, please activate CP-LOCK in OFF mode on transmitter.
Page 10