BCF Technology Ltd BGO01 Manual De Usuario
www.imv-imaging.com | 5
Power on
Fit the battery into the rear battery cradle and
ensure that the battery clip is fully engaged.
ensure that the battery clip is fully engaged.
To power on the Wi-Fi BUG, press and hold the
power button until the power LED starts flashing,
then release the button, after a few seconds,
the power LED will remain on, while the Wi-Fi LED
continues flashing.
power button until the power LED starts flashing,
then release the button, after a few seconds,
the power LED will remain on, while the Wi-Fi LED
continues flashing.
•
Changing scanner
To connect to a different scanner, press and
release the power button on the Wi-Fi BUG, the
“SCANNING” message will be displayed and the
Wi-Fi LED will flash as the BUG searches for the
available next scanner.
release the power button on the Wi-Fi BUG, the
“SCANNING” message will be displayed and the
Wi-Fi LED will flash as the BUG searches for the
available next scanner.
Once the BUG is connected to the new scanner,
the Wi-Fi LED will stop flashing and remain blue
and the “SCANNING” message will be replaced
by the serial number of the scanner that the BUG
is connected to, the serial number is displayed
for approximately 5 seconds.
the Wi-Fi LED will stop flashing and remain blue
and the “SCANNING” message will be replaced
by the serial number of the scanner that the BUG
is connected to, the serial number is displayed
for approximately 5 seconds.
•
Operating
instructions
On screen indicators
In addition to the “SCANNING” and scanner
serial numbers, the Wi-Fi BUG will display the
current charge level of both the scanner (lower
left of the display) and of the Wi-Fi BUG (lower
right of the display).
serial numbers, the Wi-Fi BUG will display the
current charge level of both the scanner (lower
left of the display) and of the Wi-Fi BUG (lower
right of the display).
Graphic of how this looks?
The BUG will display the freeze indicator when
the scanner freeze button is pressed, the gain
indicator when gain is adjusted on the scanner
and the depth indicator when depth is adjusted
on the scanner (gain and depth adjustments are
only available on Easi-Scan:Go scanners).
the scanner freeze button is pressed, the gain
indicator when gain is adjusted on the scanner
and the depth indicator when depth is adjusted
on the scanner (gain and depth adjustments are
only available on Easi-Scan:Go scanners).
•
Connecting to scanner
The Wi-Fi BUG will automatically check for
available scanners and will display “SCANNING”
in the upper right corner of the screen.
available scanners and will display “SCANNING”
in the upper right corner of the screen.
Once the Wi-Fi BUG has connected to a
scanner, the Wi-Fi LED will stop flashing and
remain blue. The “SCANNING” message will be
replaced by the serial number of the scanner to
which you are connected, the serial number is
displayed for approximately 5 seconds.
scanner, the Wi-Fi LED will stop flashing and
remain blue. The “SCANNING” message will be
replaced by the serial number of the scanner to
which you are connected, the serial number is
displayed for approximately 5 seconds.
•