Connection Technology System Inc. VRG531X Manual De Usuario

13 

 

It is easy to use and maintain this WLAN Residential Gateway. The procedures 
are suggested when you want to identify faults, perform hardware replacement 
and firmware upgrading. 
 

 

Identifying faults can greatly reduce the time required to find the problem and 
solution. Users may perform local or remote checks to find the problems. 
 

Users can perform local checks by observing LED indicators status. 

z  When the whole system fails to function,   

„  Check Power LED status. That power LED goes off indicates the 

gateway does not any power. 

„  Check Power connection. Make sure that the power adaptor is 

connected properly firmly. 

„  Reset power. Unplug and re-plug the power adaptor to restart the 

whole system. 

 

z  When certain network link fails to function, 

„  Locate the port of the switch 

„  Check Port Link Status LED. That WAN/LAN LED goes off indicates 

the gateway is link down. 

„  Check cable connection between the port and the connected device. 

Make sure that the cable is connected properly and firmly. 

„  Reset power. Unplug and re-plug the power adaptor to restart the 

whole system. 

 

Users may check the WLAN Residential Gateway through CLI/Web/SNMP 
management if fail problem remains after finishing hardware check. For detailed 
procedures, please refer to the Network Management U

VHU¶VManual.