RBH Sound BT-100 Manual De Usuario

5

Specifications

Power Supply:
Rated Output Power: 

Frequency Response:
Minimum Impedance:
Bluetooth

®

/DSP: 

Bluetooth

®

 Range:

Dimensions:
Weight:

AC 110V ~ 240V 50/60Hz
100W (50W x 2) @ 4 Ohms 

50W (25W x 2) @ 8 Ohms 
20Hz ~ 20kHz
4 Ohms
Bluetooth 4.1  Qualcomm

®

 aptX

™

 CODEC Technology/ 

24 bit Qualcomm

®

 Kalimba

™

 DSP

33 feet (10 Meters)
7-1/2” W x 5-1/2” D x 2” H (190mm W x 139mm D x 52mm H)
2.87 lbs. (1.3 Kg)

No power.

No sound.

 

 

 

Suddenly no sound  

during operation. 

Poor sound.

LED off. 

Unable to pair 

Bluetooth

®

 device.

1.  Power cord is disconnected.

2.  Poor connection at the power socket or the power  

socket is inactive.

1.  Switch source input from Bluetooth

®

 to Optical, or any other 

source, and back to Bluetooth

®

 to refresh the signal connection. 

2.  The speakers are disconnected.

3.  Volume control set to lowest setting.

4.  Check for damaged signal cables.

5.  Check if the LEDs are blinking. If not, power cycle the amplifier 

and ensure the LED display is in standby. If the amplifier still 

doesn’t work, contact RBH Sound Customer Service.

1.  Check if the audio source works.

2.  Product may have entered into over-heat protection mode, check 

if LED is orange. If orange, let amplifier cool down and it will 

automatically restart.

1.  Audio source problem.

2.  Bad or incorrect speaker connection.
1.  Check if the amplifier is connected to the power outlet, confirm 

power with a voltage meter.

Push the Bluetooth

®

 pairing button after amplifier is powered on. 

See illustration on page 2 for location of Bluetooth

®

 pairing button. 

Troubleshooting