Intellion AG LODSHELF01 Manual De Usuario
© Intellion AG 2018; User Manual detection Shelf
Seite 6/8
1.4
Scanning modes of the LeanOrder detectionShelf
The detection Shelf has two scanning modes to detect empty bins:
•
Automatic scanning mode
•
Manual scanning mode
The automatic scanning mode is the default-scanning mode. In this mode, the LeanOrder
detectionShelf scans every predefined time period (e.g. all four hours) sequentially over all an-
tennas integrated in the detectionShelf. After an automatic scan round, the detection Shelf sends
automatically the RFID ePC codes of all detected empty bins to a central LeanOrder Controller
in the manufacturing facility.
The manual scanning mode is activated using a magnet that triggers a hall sensor within the
LeanOrder detectionShelf. The magnet has to be placed on top of the detection Shelf directly
above the LED (see Figure 5). During the manual scan, the LED next to the barcode will flash.
After an automatic scan round, the detection Shelf sends automatically the RFID ePC codes of
all detected empty bins to a central LeanOrder Controller in the manufacturing facility.
Figure 5: A magnet on the LeanOrder detectionShelf
to trigger the manual scanning mode