Cyclevision Pty Ltd CVHC0101 Manual De Usuario

12

13

The Cyclevision Helmet comes fully assembled with an internal 3250mA 

Lithium Polymer Battery.  

The Battery is fully enclosed in its own separate housing and is not 

removable from the Cyclevision Helmet. Do not attempt to open the 

Helmet to change the battery under any circumstances. The battery 

housing has been sealed therefore damage to the housing, camera 

and PCB may occur if tampered with. Any attempt to open the camera 

housing will result in voiding of the warranty.  

To charge the Cyclevision Helmet plug one end of the USB cable 

into any wall power outlet, we recommend a DC5V - 2A USB charger 

adapter, and place the other end of the Micro USB cable into the REAR 

Micro USB Port. 

Do not plug power into the front USB port – this will not result in battery 

recharge and may damage the electronics.

The Cyclevision Helmet must be properly secured on the head without 

rocking forward over the eyes and/or backward on the head. 

This does not only provide correct protection in case of a crash but is 

necessary for the quality of the video recording. Both the front and rear 

camera angles are preset for correct helmet positioning. 

Cyclevision cannot be held responsible for vision data capture angle 

differences if the Helmet is not correctly placed and secured on the head.

SETTING UP CYCLEVISION HELMET

CHARGING CYCLEVISION HELMET