Instinct Performance LLC REV Manual De Usuario
Pairing with Bluetooth
•
With the REVs on, hold the [M] and [+] buttons simultaneously for 4 seconds to
initiate Pairing Mode. When in Pairing Mode, the LCD display will read PA to
indicate that the device is waiting for a pairing request. The REVs will remain in
pairing mode until paired or until [M] or [+] button is pressed.
initiate Pairing Mode. When in Pairing Mode, the LCD display will read PA to
indicate that the device is waiting for a pairing request. The REVs will remain in
pairing mode until paired or until [M] or [+] button is pressed.
•
Open the VIMA REV iOS or Android app. Only after the REVs are in pairing
mode, select “USE YOUR REV”; the app should automatically detect your REVs
and the REV CONTROLLER will become available on your mobile device.
mode, select “USE YOUR REV”; the app should automatically detect your REVs
and the REV CONTROLLER will become available on your mobile device.
•
Use the REV CONTROLLER to change VQs and modes.
•
The REVs have an approximate range of ___ meters for remote control. If the
REVs are turned off, the mobile app is closed, or the REVs go out of range of the
mobile device you will have to go through the pairing process again from the
beginning.
REVs are turned off, the mobile app is closed, or the REVs go out of range of the
mobile device you will have to go through the pairing process again from the
beginning.
Cleaning your REVs
•
Do not wash or rinse the REVs under water.
•
Remove the strap accessory from the REVs and hand wash the strap assembly
in water.
in water.
•
Clean the lenses with the included micro-fiber cloth only. Do not wash.
REV Training Best Practices
Choose Right or Left Eye
Default Mode
Alternating Mode
Change the VQ to
increase or decrease
difficulty
Press pause to hold in
sustained clear mode
for one or both eyes