Beijing Inspiry Technology Co. Ltd. S-001 Manual De Usuario

InsPos S Operation Instruction

www.inspiry.cn

12 / 21

your device is connected to network successfully.

配置页面二维码 Configuration webpage

B、如何察看打印机波特率？串口打印机需要获取打印机的波特率信息，将打印机关机后，按

住 feed 键不放然后开机，松开后打印机会打出自检内容，其中有波特率相关信息。

B. How to check the Baud rate of printer? The Baud rate of the parallel interface printer

is needed. Power off the printer，long press the “feed” and restart the printer. The
printer will print self-test information including the Baud rate.

C、如出现打印乱码，查看打印机波特率是否和服务器默认波特率、纸张大小、打印协议等是

否一致，不一致登录客户系统修改，保证各项打印参数与服务器一致。

C. If the printer prints random codes, please check the consistency of Baud rate, paper

size and printing protocol between the printer and server default. Make sure the print
parameters are consistent with the server.

4. 搬运储藏信息 Handling and storage

4.1 储藏环境要求：Storage environment requirements:

4.1.1 环境温度 +5 摄氏度至 +40 摄氏度

4.1.1 Environment Temperature：5℃ to 40℃

4.1.2 相对湿度 50%至 85%。保持在常温、无酸、无碱和无其他腐蚀性气体的条件下，杜绝阳光
直接照射及雨水侵泡，防止重物压挤变形。

4.1.2 Relative humidity is from 50% to 85%. Keep it in normal temperature, free acid and
alkali, no other corrosive gas. Prevent direct sunlight, rain water invasion, and extrusion
deformation.

4.2 搬运要求：Handling requirements: