GUANGDONG GDA Valve Technology.Co.Ltd GH03-C Manual De Usuario
LCD-Liquid Crystal Display
1.
DISPLAY Indicates CURRENT room temperature.
2.
ºF OR ºC Indicates degrees Fahrenheit or Celsius.
3.
FLAME Indicates burner/valve in operation.
4.
ROOM Indicates remote is in THERMO operation.
5.
TEMP Appears during manual operation.
6.
SET Appears during time the of setting the desired
Temperature in the thermo operation.
SETTING ºF/ºC SCALE
The factory setting for temperature is ºF.To change this setting to ºC,first
。
Press the ON key and OFF key on the transmitter at the same time
this will change from ºF to ℃.Follow this same procedure to change
from ℃ back to ºF.
from ℃ back to ºF.
MANUAL FUNCTION
To operate the system in the manual”MODE”do the following.
ON OPERAION
Press the ON key the appliance flame will come on.During this time
the LCD screen will show ON,after 3seconds the LCD screen will
default to display room temperature and the word TEMP will
show.(Flame icon will appear on LCD screen in manual on mode)
the LCD screen will show ON,after 3seconds the LCD screen will
default to display room temperature and the word TEMP will
show.(Flame icon will appear on LCD screen in manual on mode)
OFF OPERATION
Press the OFF key the appliance flame will shut off.During this time
the LCD screen will show OF,after 3seconds the LCD screen will
default to display room temperature and the word TEMP will show.
the LCD screen will show OF,after 3seconds the LCD screen will
default to display room temperature and the word TEMP will show.
THERMOSTAT FUNCTION
SETTING DESIRED ROOM TEMPERATURE
When used as a vented decorative appliance,use of the thermostat
function is prohibited,operate manually only.
function is prohibited,operate manually only.
This remote control system can be thermostatically controlled when
the transmitter is in the THERMO mode(The word ROOM must be
displayed on the screen).To set the THERMO MODE and DESIRED
room temperature.
the transmitter is in the THERMO mode(The word ROOM must be
displayed on the screen).To set the THERMO MODE and DESIRED
room temperature.
Press the MODE key until the LCD screen shows the word
ROOM,then the remote is in the thermostatic mode
ROOM,then the remote is in the thermostatic mode