Garbarino SA DATSUN-D5001 Manual De Usuario

1 Getting Started

1.1 Getting to know your touch phone

1.2 Installing the SIM card and storage card

You need to remove the back cover before you can install the SIM card and

storage card. Also, you can remove and install the SIM card and storage card

when the phone is turning on.

To remove the back cover

1. Make sure your device is turned off.

2. Firmly hold the device with both hands and the front panel facing down.

3. Push the back cover up with your thumbs until it disengages from the device

and then slide it up to remove.

To install the SIM card

The SIM card contains your phone number, service details, and phone book/

message memory. Your device is supported 2G, 3G (WCDMA) SIM cards.

1. Remove the back cover if it is installed.

2. Locate the SIM card slot, and then insert the SIM card with its gold contacts

facing down and its cut-off corner facing out the card slot.

3. Slide the SIM card completely into the slot.

Note: • The phone can be supported the double SIM cards. The card slot

will be supported GSM or 3G (WCDMA), but one SIM card can use 3G

networks only.
• Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement SIM card. There may

be fees for this service.

To install a memory card

To have additional storage for your images, videos, music, and files, you can

purchase a memory card and install it into your device.

1. Make sure that your device is turned off, and then remove the back cover.

2. Locate the memory card slot on the upper part of the exposed right panel.

3. Insert the memory card into the slot with its gold contacts facing down until it

clicks into place.