Guangzhou Skydance Co. Ltd. R11 Manual De Usuario

● Apply to single color LED controller.

● Ultra sensitive color adjustment touch slide.

● Each remote can match one or more receiver. 

● CR2032 battery powered.

● Operate with LED indicator light.

●  Magnet on the back which can be easily stuck on back holder or any metal surfaces.

User Manual Ver 1.0.6         

www.iskydance.com

Model No.: R11

Features

Page 1

Touch color slide/Single color dimming/Wireless remote 30m distance/CR2032 battery/Magnet stuck fix

2.4G RF Remote 

Mechanical Structures and Installations

36.00 mm

139.00 mm

11.00 mm

Operation

● To extend battery life, no operation after 20 seconds, the touch slide will enter sleep state.

● If the light is on, long press on/off key exceed 1 second, then touch slide 

ming.

to dim

● If the light is off, short press on/off key to turn on light, then touch slide 

ming.

to dim

Match Remote Control (two match ways)

Use the controller’s Match key

Match: 
Short press match key, immediately press on/off 
key of the remote.

Use Power Restart 

Match: 
Switch off the power, then switch on power again, 
immediately short press on/off key 3 times on the remote. 
The light blinks 3 times means match is successful.

Delete: 
Switch off the power, then switch on power again, 
immediately short press on/off key 5 times on the remote. 
The light blinks 5 times means all matched remotes were 
deleted.

Delete: 
Press and hold match key for 5s to delete all match, 
The light blinks 5 times means all matched remotes 
were deleted.

End user can choose the suitable match/delete ways. Two options are offered for selection:

Technical Parameters

Input and Output

Warranty 

 5 years

  Warranty

Operation temperature

Case temperature 

(

Max.

)

Environment 

IP20  

IP rating

Ta: -30

O

C ~ +55

O

C

T c: 

+85

O

C

Output signal                          RF2.4GHz

(

)

Working voltage                     3VDCCR2032

(

)

Working current                      ＜5mA 

Standby current                      ＜10μA

Standby time                           1 year

Remote distance                      30m

Safety and EMC

EMC standard (EMC)

EN301 489,EN 62479  

Radio Equipment(RED)

EN300 328

Certification

CE,EMC,LVD,RED

EN60950

Safety standard(LVD)

R11    2.4G RF Remote 

LVD RED

53.50 mm

Note: Before the  rst use, 
please remove the protective 
film on the battery.

C 2032 Battery

R

Back holder with magnet

To  x the remote, three options are offered for selection:

Option 1: stuck the remote on any metal surfaces directly.

Option 2: fix the remote' back holder on the wall with two screws.

Option 3: adhere the remote' back holder to the wall with paster.