ShenZhen Hengjin maker technology CO. Ltd CK-002 Manual De Usuario
10
Child Lock
The icon is locked when it is displayed, but not displayed when it is
not locked
11
Add button
Adjust the temperature and adjust in the setting mode
12
Minus buttons
Adjust temperature, adjust in the setting mode, minute, week, long
press to switch children lock and unlock
13
Set the key
Press the setting button to enter the setting time, week, and long
press the button to enter wifi pairing
14
Internal sensor
The sensor that detects indoor temperature
15
reset button
Press this button to shut down and restart the machine to restore
the factory Settings
16
The power entry Ac port
17
The power
export
Load side exit interface
18
external sensors
External sensor interface
Pairing mode
: long press the setting button when the device is on, the wifi icon
flashes and stops flashing for about 60 seconds.The pairing is successful, the wifi icon on
the server is always on, and the clock will update the network time.
the server is always on, and the clock will update the network time.
Manual mode
: when the indoor temperature is 3 degrees below the set temperature,
turn on the heating immediately, and the heating icon is displayed.To set the temperature
value (manually set the temperature value), stop heating and the heating icon is not
displayed.
value (manually set the temperature value), stop heating and the heating icon is not
displayed.
Automatic mode
: when the indoor temperature is below 21 degrees, turn on the
heating immediately, and the heating icon is displayed.When the temperature is set (from
Monday to Sunday, 6 times per day), stop heating and the heating icon is not
displayed.The default 24 degrees。
Monday to Sunday, 6 times per day), stop heating and the heating icon is not
displayed.The default 24 degrees。
Alarm mode
: when the local plate temperature is above the temperature limit, stop
heating. The default is 55 degrees.
Backlight function
: backlight, power-on highlights;Turn off low.When the backlight
is turned off and turned off, press other keys/receive WIFI data and the backlight will be
turned on for 10 seconds.
turned on for 10 seconds.
Heating function:
when the indoor temperature is 3 degrees below the set
temperature, start heating; when it is higher than the set temperature, stop heating.
Automatic upload function:
upload all data to APP without any action for 10
seconds.So the APP updates the temperature every 10 seconds.
Features and functions:
1. After connecting with the WiFi router in your home, you can set the thermostat