Alpine Electronics Inc 9ZUA147 Manual De Usuario
93
-EN
This unit allows communication with the vehicle’s iDataLink module,
when available. This data gives status on various vehicle modes as well as
the ability to control certain vehicle operations.
When you use iDataLink mode, set each setting other than
“Aftermarket” in “Setting the Source Category” (page 47).
when available. This data gives status on various vehicle modes as well as
the ability to control certain vehicle operations.
When you use iDataLink mode, set each setting other than
“Aftermarket” in “Setting the Source Category” (page 47).
• Available functions differ depending on your vehicle. For details, refer to
your vehicle’s instruction manual.
About Audio Interrupt
Audio Interrupt is the function that outputs sound from the unit when
Voice Information (audio reading from the phone book, etc.)* from the
vehicle occurs.
Voice Information (audio reading from the phone book, etc.)* from the
vehicle occurs.
• The Audio Interrupt function of the vehicle differs depending on the
type and grade of the vehicle.
* For your safety, when interrupted with Voice Information, you cannot
operate the buttons on the front panel or the touch buttons on the
display, except for some operations.
display, except for some operations.
- The operating restrictions may differ depending on which mode the
unit is in during Voice Information.
- You can use the
(CAMERA) button to display the camera view
and switch the image pattern while the camera image is being
displayed.
displayed.
- You can use the
(MUTE) button or the
/
(DOWN/UP)
button to control the volume of Voice Information.
- Operation of the Remote Control unit is also restricted.
Access to iDataLink Mode
You can check the car’s status, set the air conditioning, etc.
1
Press and hold the
(Favorite) button for at least 2
seconds, or touch [
] (Vehicle Info.) in the Menu
screen to activate iDataLink mode.
• The iDataLink mode screen selected in “Setting the Default
Vehicle Screen” (page 47) is displayed.
2
Touch the desired tag on the top of the screen.
Select item:
Climate / Gauges / Park Sensor / Vehicle Info. / Car Setting
• The displayed tag options differ depending on the type of vehicle.
Climate screen example
3
Adjust or confirm the item/information accordingly.
• Operable functions and displays may differ depending on the vehicle.
iDataLink Function Screen example
Climate screen example
You can control the temperature inside the vehicle, etc.
Gauges screen example
You can check the vehicle's speed, the engine's rotation speed, etc.
Parking sensor screen example
You can check the distance from the front and rear of the vehicle to an
obstacle.
obstacle.
• If the car sensor detects an obstacle, the screen automatically changes to
the Parking sensor screen. For details, see “About Parking Sensor screen”
(page 94).
(page 94).
iDataLink Operation