GTSYS Limited IRUPOE-07-V2 Manual De Usuario
Quick Reference Guide
4 Set IP-Address Dialogue
To connect the APTool with the integrated RFID reader via TCP/IP you must know the readers IP-
Address. This can be determined from the leases table of the DHCP server. The readers MAC address is
written on a label close to the RJ45 Ethernet connector
Address. This can be determined from the leases table of the DHCP server. The readers MAC address is
written on a label close to the RJ45 Ethernet connector
4.1 To set the reader IP-Address
•
Select “Settings->Set IP-Address” from the top menu bar
•
Type a IPv4 dotted decimal address to the input field
•
Click on “OK”
GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: sales@gtsys.com.hk
Copyright © 2015 GTSYS – GTSYS reserves the right to change specifications without prior notice
Page 8 / 11
Illustration 5: Set IP-Address
Notice:
If a connection had been established, the network icon in the status bar changed
from
If a connection had been established, the network icon in the status bar changed
from
→
and the current IP address is show.