Intel 2760QM FF8062701065300 Manual De Usuario
Los códigos de productos
FF8062701065300
Datasheet, Volume 1
69
Electrical Specifications
Notes:
1.
1.
10 k
pull-up and 4 k
pull-down to a voltage divider from +3.3 V.
7.5.3.1
PCI Express* DC Specifications
The DC specifications for the PCI Express* are available in the PCI Express* Base
Specification. This document will provide only the processor exceptions to the PCI
Express* Base Specification.
Specification. This document will provide only the processor exceptions to the PCI
Express* Base Specification.
Note:
The processor is capable of up to 8.0 GT/s speeds.
7.5.3.2
DMI2/PCI Express* DC Specifications
The DC specifications for the DMI2/PCI Express* are available in the PCI Express
®
Base
Specification 2.0 and 1.0. This document will provide only the processor exceptions to
the PCI Express
the PCI Express
®
Base Specification 2.0 and 1.0.
7.5.3.3
Reset and Miscellaneous Signal DC Specifications
For a power-on Reset, RESET_N must stay active for at least 3.5 milliseconds after V
CC
and BCLK have reached their proper specifications. RESET_N must not be kept asserted
for more than 100 ms while PWRGOOD is asserted. RESET_N must be held asserted for
at least 3.5 milliseconds before it is deasserted again. RESET_N must be held asserted
before PWRGOOD is asserted. This signal does not have on-die termination and must
be terminated on the system board.
for more than 100 ms while PWRGOOD is asserted. RESET_N must be held asserted for
at least 3.5 milliseconds before it is deasserted again. RESET_N must be held asserted
before PWRGOOD is asserted. This signal does not have on-die termination and must
be terminated on the system board.
§
Table 7-19. Miscellaneous Signals DC Specifications
Symbol
Parameter
Min
Typical
Max
Units
Notes
PROC_SEL_N Signal
V
O_ABS_MAX
Output Absolute Max Voltage
—
1.10
1.80
V
1
I
O
Output Current
—
—
0
A
1
SKTOCC_N Signal
V
O_ABS_MAX
Output Absolute Max Voltage
—
3.30
3.50
V
I
OMAX
Output Max Current
—
—
1
mA