Coollaboratory Liquid MetalPad MPAD-1G Manual De Usuario
Los códigos de productos
MPAD-1G
All company and product names may be trade names,
Press: presse@coollaboratory.com
trademarks or registered trademarks of the respective owners.
Internet: http://www.coollaboratory.com
Further installation with a software application
Motherboard manufactures and graphic cards ship with applications for controlling the (clock) speed
for example of processors and fans. If you have no such tool you can download free available tools
from the internet. The following manual uses the tool Speedfan from the author Almico.
You can download Speedfan from:
Motherboard manufactures and graphic cards ship with applications for controlling the (clock) speed
for example of processors and fans. If you have no such tool you can download free available tools
from the internet. The following manual uses the tool Speedfan from the author Almico.
You can download Speedfan from:
Example for the installation with software application (Speedfan)
Start the software after installation and wait until Speedfan has checked all sensors and
components of your computer system. This can take 20-30 seconds.
Set your computer under load
Start the software after installation and wait until Speedfan has checked all sensors and
components of your computer system. This can take 20-30 seconds.
Set your computer under load
– you can do this with applications which use a lot of CPU
performance for example and watch closely the temperature in the display of Speedfan.
The temperature, which responds immediately and clearly rise, is the temperature of the
cooler -
The temperature, which responds immediately and clearly rise, is the temperature of the
cooler -
in this case the CPU cooler. If you can’t identify the temperature definitely start a
separate application for watching the temperature (Speedfan). We recommend
EVEREST Ultimate Edition from Lavalys for putting under load.
Check to see if you can adjust the CPU fan with Speedfan. The best and securest way is
visual verification of the CPU fan in your computer after you have changed the fan speed.
If you can adjust the fan with Speedfan start the next step of the installation (BurnIn of the
Liquid MetalPad).
After the temperature has reached its final value you can adjust the CPU fan speed with
Speedfan. Decelerate the fan speed carefully (step by step) and watch closely the
temperature. The temperature should rise until you have reached the melting point of the
MetalPad - according to the fan speed. You can see it with the temperature curve if the
temperature is falling down (temporary). Now accelerate the fan speed to 100%. The
temperature will reduce until it has reached his final value
EVEREST Ultimate Edition from Lavalys for putting under load.
Check to see if you can adjust the CPU fan with Speedfan. The best and securest way is
visual verification of the CPU fan in your computer after you have changed the fan speed.
If you can adjust the fan with Speedfan start the next step of the installation (BurnIn of the
Liquid MetalPad).
After the temperature has reached its final value you can adjust the CPU fan speed with
Speedfan. Decelerate the fan speed carefully (step by step) and watch closely the
temperature. The temperature should rise until you have reached the melting point of the
MetalPad - according to the fan speed. You can see it with the temperature curve if the
temperature is falling down (temporary). Now accelerate the fan speed to 100%. The
temperature will reduce until it has reached his final value
– this can take some minutes.
You should have now better temperatures (averaged 4-7°C) with the Liquid MetalPad
compared to other heat-conductive pastes, as example silicone pastes. Please note that
you will get no or only marginal changes compared to
the “Coollaboratory Liquid Pro”.
The installation is successful if the temperature is improved. If the temperature is not
changed repeat the installation (melting of the MetalPad).