Yamaha Corporation 11F59 Manual De Usuario
11
Tools
You will need the following tools at hand when installing the CRW6416S drive.
Philips Screwdriver
You will need to use this when removing the cover of your computer and when
mounting the drive. You may also need to temporarily remove the sound card to
gain access to the CD audio connectors. In which case a small screw retaining
the sound card’s face plate has to be removed.
mounting the drive. You may also need to temporarily remove the sound card to
gain access to the CD audio connectors. In which case a small screw retaining
the sound card’s face plate has to be removed.
Long-Nosed Pliers
You will need these to insert or remove the plastic jumper shunts when setting
the jumper switches at the back of the CRW6416S drive.
the jumper switches at the back of the CRW6416S drive.
System Configuration
2/19CRW/e.qx 2/19/99 5:46 PM Page 11