Beam Matrix Limited BEAM360L Manual De Usuario
Basic Operation
Beam directions of a bulb can be changed by panning and tilting the reflector. The user can select 10 levels of
brightness using the remote control.
Beam directions of a bulb can be changed by panning and tilting the reflector. The user can select 10 levels of
brightness using the remote control.
Key sequence
Function
Power up the remote control.
Indicating LEDs of the remote
control shows which LAMP(s)
have been selected
Indicating LEDs of the remote
control shows which LAMP(s)
have been selected
# 1
Set all the selected LAMP(s) to
the lowest light level
the lowest light level
# 10
Set all the selected LAMP(s) to
the highest light level
the highest light level
# $ ($ can be
2,3,4,5,6,7,8 or 9)
2,3,4,5,6,7,8 or 9)
Set all the selected LAMP(s) to
the light level $
the light level $
3
Reflector pan to a new direction
of 45 degrees clockwise relative
to the present direction
of 45 degrees clockwise relative
to the present direction
7
Reflector pan to a new direction
of 45 degrees counter clockwise
relative to the present direction
of 45 degrees counter clockwise
relative to the present direction
1
Reflector increase tilting by 5
degrees unless it reaches the
maximum angle of 30 degrees
degrees unless it reaches the
maximum angle of 30 degrees
reflector
5
Reflector decrease tilting by 5
degrees unless it reaches the
maximum angle of 30 degrees
degrees unless it reaches the
maximum angle of 30 degrees