Bose Corporation 416317 Manual De Usuario

 Preparing the Headset for Use

1.  Pull back on the sleeve near the end of the 6-pin plug.
2.  Gently continue pulling back to remove the plug from the connector. 
Caution:   Do not pull the connector out without first pulling back the sleeve.  

Forcing the connector out will damage the cable and/or the aircraft 

instrument panel.

Pull sleeve back, then pull plug out

Sleeve

The most common battery powered (only) version of the headset has two general 

aviation (G/A) plugs that connect to the aircraft audio. Although the plugs look 

similar, the microphone plug is shorter, thinner, and has a slightly different shape 

than the intercom plug. 
Insert the thicker intercom plug in first. It will only fit into one of the jacks. 

Then insert the thinner microphone plug into the other jack.

Microphone

Intercom/Audio

The headset is also available with other types of plugs for connecting to various 

aircraft audio jacks. These single-plug connectors should be inserted into the ap-

propriate jack on your aircraft control panel. Refer to “Power and cable variations”