Avaya Canada Corporation NTMQ75AA Manual De Usuario
14 / Picocell 1900 Antenna System Installation
Method 12-0152
September 4, 1998
Draft
5.0 Mounting the Hybrid(s)
Hybrids may be mounted on bare wall surfaces; transceivers must
follow mounting guidlines listed in IM 02-0245. Typical back board
mounting is illustrated in Figures 5 and 6. Hybrids are passive devices
and may be mounted in enclosed spaces; leave room for cabling and test
access. Ceiling mounting of hybrids should include custom brackets
with nut and bolt fasteners with IDS clips (see IM 02-0245) to support
the hybrid and cables. Supporting hybrids on ceilings with common dry
wall anchors is not recommended. The hybrid requires a mounting kit
consisting of:
follow mounting guidlines listed in IM 02-0245. Typical back board
mounting is illustrated in Figures 5 and 6. Hybrids are passive devices
and may be mounted in enclosed spaces; leave room for cabling and test
access. Ceiling mounting of hybrids should include custom brackets
with nut and bolt fasteners with IDS clips (see IM 02-0245) to support
the hybrid and cables. Supporting hybrids on ceilings with common dry
wall anchors is not recommended. The hybrid requires a mounting kit
consisting of:
- 2.5" x # 10 wood screws
- washers 1/2" outside diameter
- a hole drilling template
- washers 1/2" outside diameter
- a hole drilling template
Figure 3 – Dual 8 Port Hybrid (CPC A0737243))
Note: The Hybrid(s) should be mounted to permit the RF cables to enter
and leave with out excessive bending and stress on connectors.
T o
Picocell
Antenna
Port
Picocell
Antenna
Port
IN 2
O U T 2
IN 1
O U T 1
O U T 7
IN 6
IN 4
IN 3
IN 5
IN 8
IN 7
O U T 3
O U T 4
O U T 5
O U T 6
O U T 8
Antennae
T o
for Type
See Table 1 & 2
for Type
See Table 1 & 2
15.5"
.231" hole X 6
1.8 m Jumper
1.75"
1.68"
T o
Unit 1
Picocell
Antenna 1
Unit 1
Picocell
Antenna 1
Cabling if radio/hybrid spacing > 6'
Cabling if radio/hybrid spacing < 6'
T o
Unit 1
Picocell
Antenna 1
Unit 1
Picocell
Antenna 1
A0737243 Dual 8 Port Hybrid
B0241275
A0600384
B0241275
'TNC' (m)
Adapter
'N' (m)
1.8 m Jumper
'N' (m)
N - N
'TNC' (m)
T o
'N' (m)
P/O Antenna
Ass'y
Ass'y
Antenna
Termination on
unused ports
unused ports
5 0
A 0 6 0 9 6 8 9