Motorola Solutions Inc. 99FT4100 Manual De Usuario
For the RX outputs, there is only 1 which is connected to the accessory connector. RX Audio 1 on
pin 7 (to be used for analog and slot 1 digital).
pin 7 (to be used for analog and slot 1 digital).
3.5
Station Control Interface
This section describes the different types of connectors and connections to the station control.
3.5.1
Bottom Panel Connections
See
Ethernet on page 54
for details.
3.5.2
Expansion Board Interface Connector
The expansion board interface utilizes a 30-pin vertical LIF connector. The location is detailed in
Figure
10: SLR 1000 Repeater Transceiver Board Connector Locations on page 45
.
Table 11: SLR 1000
Repeater Front View (without top Cover) Callout Legend on page 45
shows the pin number locations.
MN003557A01-AA
Chapter 3: SLR 1000 Transceiver Board
Send Feedback
49
Preliminary
FCC
Filing