Motorola Solutions Inc. 99FT4100 Manual De Usuario
Chapter 9
SLR 1000 Maintenance and
Disassembly/Reassembly
Disassembly/Reassembly
9.1
Introduction
This chapter provides details about the following:
• Routine maintenance
• Preventive maintenance (inspection and cleaning)
• Safe handling of CMOS and LDMOS devices
• Disassembly and reassembly of the repeater
• Repair procedures and techniques.
9.2
Routine Maintenance
NOTICE: Clean the repeater with a soft dry cloth while in service.
The SLR 1000 Repeater and ancillary equipment have been designed with state-of-the-art technology
and operate under software control, thus requiring minimal routine maintenance. Virtually all repeater
operating parameters are monitored and self-corrected by the Transceiver and the firmware it runs,
which makes adjustments and tuning virtually unnecessary.
and operate under software control, thus requiring minimal routine maintenance. Virtually all repeater
operating parameters are monitored and self-corrected by the Transceiver and the firmware it runs,
which makes adjustments and tuning virtually unnecessary.
Provided that the equipment is installed in an area which meets the specified environmental
requirements, the only routine maintenance task required is the calibration of the repeater reference
oscillator circuit.
requirements, the only routine maintenance task required is the calibration of the repeater reference
oscillator circuit.
MN003557A01-AA
SLR 1000 Maintenance and Disassembly/Reassembly
Send Feedback
71
Preliminary
FCC
Filing