Panasonic Corporation of North America 96NKX-HNC300 Manual De Usuario
Troubleshooting
General use
Problem
Cause & Solution
The monitor unit does
not work.
not work.
R Make sure the battery is installed correctly (page 14).
R Fully charge the battery.
R Fully charge the battery.
The camera unit does
not work.
not work.
R Make sure the AC adaptor is connected to the camera unit and
power outlet (page 11).
The monitor unit is
turned off.
turned off.
R Press and hold M
N located on the top of the monitor unit.
Noise is heard, sound
cuts in and out.
cuts in and out.
R You are using the monitor unit or camera unit in an area with
high electrical interference. Re-position the monitor unit and use
the camera unit away from sources of interference.
the camera unit away from sources of interference.
The monitor unit or
camera unit does not
sound.
camera unit does not
sound.
R The speaker volume is turned off. Adjust the speaker volume
Monitor unit display
Problem
Cause & Solution
The display is in a
language I cannot read.
language I cannot read.
R Change the display language setting (page 15).
is displayed.
R The monitor unit is too far from the camera unit. Move the
monitor unit closer to the camera unit.
R The camera unit's AC adaptor is not properly connected.
Reconnect the AC adaptor to the camera unit.
R The camera unit has not been registered to the monitor unit.
Register the camera unit (page 27).
The monitor unit display
is blank.
is blank.
R The monitor unit is in sleep mode. Press any button on the
monitor unit to activate the display.
R The monitor unit is not turned on. Turn on the monitor unit
Images are white or
black.
black.
R The brightness of the display is not correctly adjusted. Adjust the
brightness when images are displayed (page 19).
R Place the camera unit in a different location or position.
28
For assistance, please visit http://shop.panasonic.com/support
Useful Information
171127_2_HN3001_(en_en)_ver.023.pdf 28
2017/11/27 22:50:28