Furuno USA Inc 9ZWRTR115 Manual De Usuario

Below tools are required for retrofit. A rubber gasket is required for retrofit.

•   Positive and negative screwdrivers
•   Rubber gasket (two holes) provided as an optional kit
•   A fuse with below characteristics is required for retrofit. Local supply.

Current rating: 5A, Voltage rating: 32V, Cable Diameter 12AWG (2.053 mm)

•  Refer to the below table about the limitation of cable length according to the ship’s 

main supply.

Note 1: Retrofit from DRS2D, DRS4D and DRS6A is available with below procedures.

Note 2: Below procedures are for using a 5A fuse.

Note 3: Make sure that the multi function display device is turned off and the two-way 
cable MOD-ASW0001 is unplugged from the multi function display device and the 
power supply unit before starting below procedures.

1. Put the radome upside down.
2. Unfasten six retaining screws at the bottom of radome and open it.

10.8 VDC

Unavailable

12 VDC

Less than 10 m only

24 VDC

No limitation