Furuno USA Inc 9ZWRTR115 Manual De Usuario
1
1.
INSTALLATION
1.1
General Information about DRS4D-NXT
• ECHO ANALYZER function, the first model in the world to achieve with marine ra-
dar, to display rain clutter, moving objects (approaching/ moving away) and static
objects with different colors.*
* Requires heading sensor and GPS sensor.
objects with different colors.*
* Requires heading sensor and GPS sensor.
• ACCU-SHIP function, the first model in the world to achieve with marine radar, to
automatically acquire only the moving objects by doppler velocity and display other
ships and their traces with large/medium/small icons.
* The judged speed of objects is dependent on its vector towards own ship.
ships and their traces with large/medium/small icons.
* The judged speed of objects is dependent on its vector towards own ship.
• RezBoost function achieved high-azimuth resolution, the same as open-array ra-
dar.
• Instant ON function.
• No radiation hazard to look out for.
• No need to worry about the life of magnetron or to replace any parts periodically.
• Retrofit from DRS2D, DRS4D and DRS6A is available with using the installed cable.
• No radiation hazard to look out for.
• No need to worry about the life of magnetron or to replace any parts periodically.
• Retrofit from DRS2D, DRS4D and DRS6A is available with using the installed cable.
Refer to Chapter 4 for retrofit.
• RACON (RAdar beaCON) and SART (Search And Rescue Transponder) within 0.5
to 1.5 NM (Range dependant) can be displayed.
* The signal from RACON and SART will be shown as a line.
* The signal from RACON and SART will be shown as a line.
• ARPA (Automatic Radar Plotting Aid) function applicable range varies according to
the range scale. 12 NM when display range is less than 1 NM. 24 NM when display
range is larger than 1.5 NM. * Changing the display range may lose the ARPA sym-
bols.
range is larger than 1.5 NM. * Changing the display range may lose the ARPA sym-
bols.
• Dual Range Mode sets below limitations.
• The maximum display range is 12 NM. (32 NM when single display)
• Echo Analyzer function becomes unselectable.
• The maximum detection range lowered by 20% at the maximum comparing to the
• Echo Analyzer function becomes unselectable.
• The maximum detection range lowered by 20% at the maximum comparing to the
single display.
1.2
Installation Considerations
Don’ts to Avoid Damages to the Radome and Connectors
• Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts
of the equipment. Those items contain organic solvents that can damage coating
and plastic parts, especially plastic connectors.
and plastic parts, especially plastic connectors.
• Do not paint the radome, its emission of the radar waves may be deteriorated.
• Do not select a location that allow water to accumulate at the base of the sensor.
• Do not cut pre-attached cable or selectable power/
• Do not select a location that allow water to accumulate at the base of the sensor.
• Do not cut pre-attached cable or selectable power/
Network
cable when installing.