ICOM 263300 Manual De Usuario
5
MEMORY OPERATION
33
New2001
D
D To indicate the channel name
[
The channel name indication can be set for independent
memory channels.
memory channels.
q Push [M/CALL•PRIO] to select the memory mode.
w Rotate [DIAL] to select the desired memory channel to be
w Rotate [DIAL] to select the desired memory channel to be
indicated the channel names.
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [S.MW•MW] several times to select
e Push [SET•LOCK] or [S.MW•MW] several times to select
“ANM” item.
r Rotate [DIAL] to turn the memory name indication ON.
t Push [V/MHz•SCAN] to exit set mode.
NOTE: When no memory name is programmed, the stored
frequency is displayed.
z Push [BAND] to select the desired frequency
band.
• Enter the desired frequency via the keypad if neces-
sary.
x Select the desired mode/channel you wish to
set the offset frequency to, such as VFO mode
or memory/call channel.
or memory/call channel.
• The offset frequency can be independently pro-
grammed into each mode or channel.
c Push [
SET
B(D-OFF)] to enter set mode.
v Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] until
“ANM” appear.
b Push [Y] or [Z] to set the memory name indi-
cation ON and OFF.
n Push [
CLR
A(MW)] to exit set mode.
Push
SET
B
IC-208H.qxd 03.2.26 20:00 Page 33 (1,1)