ICOM 263300 Manual De Usuario
III
QUICK REFERENCE GUIDE
New2001
D Microphone connection
Connect the supplied microphone as illustrated below.
D Separation cable connection
Using the supplied separation cable (3.5 m; 11.5 ft) or the op-
tional separation cable (7 m; 23 ft) the controller can be sep-
arated from the main unit, doubling as a remote controller.
tional separation cable (7 m; 23 ft) the controller can be sep-
arated from the main unit, doubling as a remote controller.
q Detach the controller as below.
w Connect a separation cable between the controller and
main unit using the supplied screws as illustrated below.
CAUTION!
NEVER short the terminals of the separation connector.
The 13.8 V power line is available in the connector, so the
transceiver may damage when short circuited.
NEVER short the terminals of the separation connector.
The 13.8 V power line is available in the connector, so the
transceiver may damage when short circuited.
NEVER short the terminals
• Controller’s rear panel
• Main unit
OPC-600 or OPC-601
q
w
e
Release latch
IC-208H.qxd 03.2.26 20:00 Page III (1,1)