ICOM 269800 Manual De Usuario
2
1
PANEL DESCRIPTION
1
y SET•LOCK KEY [SET
]
➥ Enters set mode when pushed. (p. 58)
➥ Keys the lock function ON and OFF when pushed for
1 sec. (p. 12)
u MONITOR•CHANNEL NAME KEY [MONI
]
➥ Push to switch the monitor function ON and OFF. (p. 13)
➥ In memory and call channel mode, switches the channel
names or number ON and OFF. (p. 30)
i OUTPUT POWER KEY [LOW
]
➥ Each push changes the output power selection. (p. 15)
➥ Select DUP–, DUP+ and simplex operation when
pushed for 1 sec. (p. 17)
o TONE/TONE SCAN KEY [TONE
]
➥ Each push selects a tone function. (pgs. 17, 48)
• Tone encoder, pocket beep, tone squelch or tone function
OFF can be selected.
➥ Push for 1 sec. to start/stop the tone scan function.
(p. 51)
!0 MEMORY/CALL•PRIORITY KEY [M/CALL
]
➥ Push to select and toggle memory, call and weather
channel* modes. (pgs. 24, 35, 65)
*Weather channels available for USA versions only.
➥ Starts priority watch when pushed for 1 sec. (p. 44)
!1 VFO/MHz TUNING•SCAN KEY [V/MHz
]
➥ Selects and toggles VFO mode and 1 MHz (or 10 MHz
for some versions) tuning when pushed. (p. 9)
➥ Starts scan when pushed for 1 sec. (p. 38)
• Cancels a scan when pushed during scan.
!2 BANK•OPTION KEY [BANK
]
➥ Push to select memory bank condition during memory
mode. (p. 32)
➥ Push for 1 sec. to select and toggle the pager and code
squelch function when the optional UT-108 is installed.
(p. 52)
(p. 52)
!3 TUNING DIAL [DIAL]
Selects the operating frequency (p. 9), memory channel
(p. 24), the setting of the set mode item and the scanning
direction (p. 38).
(p. 24), the setting of the set mode item and the scanning
direction (p. 38).
D Microphone connector (front panel view)
q +8 V DC output (Max. 10 mA)
w Channel up/down
e 8 V control IN
r PTT
t GND (microphone ground)
y MIC (microphone input)
u GND
i Data IN
w Channel up/down
e 8 V control IN
r PTT
t GND (microphone ground)
y MIC (microphone input)
u GND
i Data IN
q
i
OPT
SCAN
PRIO
T-SCAN
DUP
ANM
LOCK