ICOM 269800 Manual De Usuario

■ Subaudible tones

(Encoder function)

D Subaudible tones

q Select the mode/channel you wish to set the subaudible

tones to, such as VFO mode or memory/call channel.

w Push [SET

] to enter set mode.

e Push [SET] or [MONI] several times until “ ” and “rt” ap-

pears; or until “ ” and “Ct” appears for tone squelch or
pocket beep use.

• When “d” is displayed in place of the 100 MHz digit, cancel the

DTMF memory encoder in advance. (p. 46)

r Rotate [DIAL] to select and set the desired subaudible fre-

quency.

t Push any other key than [SET] or [MONI] to exit set mode.

☞NOTE: The subaudible tone encoder frequency can be set

in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.

z Set the mode/channel you wish to set the sub-

audible tones to, such as VFO mode or mem-
ory/call channel.

• The subaudible tone frequency is independently pro-

grammed into each mode or channel.

x Push [

B(D-OFF)] to enter set mode.

c Push [

B(D-OFF)] or [

C(T-OFF)] several

times until “ ” and “rt” appears; or until “ ” and
“Ct” appears for tone squelch or pocket beep
use.

• When “d” is displayed in place of the 100 MHz digit,

cancel the DTMF memory encoder in advance. (p. 46)

v Push [Y

Y] or [Z

Z] to select and set the desired

subaudible tone frequency.

• Push and hold [Y

Y]/[Z

Z] to change the above tones

continuously.

b Push [

A(MW)] to exit set mode.

(unit: Hz)

67.0
69.3
71.9
74.4
77.0

79.7
82.5
85.4
88.5
91.5

94.8
97.4

100.0
103.5
107.2

110.9
114.8
118.8
123.0
127.3

131.8
136.5
141.3
146.2
151.4

156.7
159.8
162.2
165.5
167.9

171.3
173.8
177.3
179.9
183.5

186.2
189.9
192.8
196.6
199.5

203.5
206.5
210.7
218.1
225.7

229.1
233.6
241.8
250.3
254.1

Push

SET

B

19

4

REPEATER OPERATION