ICOM 269800 Manual De Usuario

28

5

MEMORY OPERATION

D Memory/call

➪call/memory

q Select the memory/call channel to be transferred.

➥ Push [M/CALL

] to select memory mode, then ro-

tate [DIAL] to select the desired memory channel.

➥ Push [M/CALL

] for 1 sec. to select the call channel.

w Push [S.MW

] momentarily. 

• “M” indicator and “– –” indication blink, and shows VFO condi-

tions.

e Rotate [DIAL] to select the target memory channel.

• “C” blinks when the call channel is selected.
• Scan edge channels, 1A/1b, 2A/2b, 3A/3b, can also be selected.

r Push [S.MW

] for 1 sec. to transfer the selected mem-

ory/call channel contents to the target memory.

• The targeted memory and transferred contents are indicated.

z Select the memory/call channel to be trans-

ferred.
➥ Push [MR/CALL] to select memory mode,

then select the desired memory channel
via [Y

Y]/[Z

Z] or keypad.

➥ Push [MR/CALL] for 1 sec. to select the

call channel.

x Push [FUNC], then [

A(MW)] momentarily.

• “M” indicator and “– –” indication blink, and shows

VFO conditions.

c Push  [Y

Y]/[Z

Z] to select the target memory

channel.

• “C” blinks when the call channel is selected.
• Scan edge channels can also be selected.
• The keypad cannot be used for the selection.

v Push  [FUNC] then push [

A(MW)] for

1 sec. to transfer the selected memory/call
channel contents to the target memory.

• The targeted memory and transferred contents

are indicated.

MR/CALL

MW

[Y]/[Z]

[EXAMPLE]: Transferring memory channel 30 contents to channel 31.

Select the memory channel, then push

.

Select the target channel.

Push          for 1 sec.

Push          then push          for 1 sec.

Select the memory channel, push          then push         .