ICOM 269800 Manual De Usuario

35

6

■ Call channel selection

➥ Push [M/CALL

] once

or twice to select the call
channel.

• “C” appears instead of mem-

ory channel number indication.

• Push  [M/CALL

] to re-

turn to memory mode, or push
[V/MHz

] to select VFO

mode.

➥ Push [MR/CALL] for 1 sec. to select the call

channel.

• Push [

] to select memory mode, or push

[VFO/LOCK] to select VFO mode.

■ Call channel transferring

q Push  [M/CALL

] several times to select the call

channel.

• “C” appears.

w Push [S.MW

] momentarily, then rotate [DIAL] to se-

lect the memory channel to transfer the contents to.

• “M” indicator and memory channel number blink.
• To transfer to the VFO, push [S.MW

] for 1 sec. 

e Push [S.MW

] for 1 sec. to transfer when a momen-

tary push was used in the previous step.

• If channel names have been programmed into the call channel,

the names are also transferred.

z Push [MR/CALL] for 1 sec. to select the call

channel.

x Push  [FUNC],  [

A(MW)] momentarily,

then push [Y

Y]/[Z

Z] to select the memory

channel to transfer the contents to.

• To transfer to the VFO, push [FUNC], then push

A(MW)] for 1 sec. 

c Push [FUNC], then [

A(MW)] for 1 sec. to

transfer when a momentary push was used in
the previous step.

• If channel names have been programmed into the

call channel, the names are also transferred.

MR/CALL

MW

[Y]/[Z]

MR/CALL

Appears

✔INFORMATION

When the VFO mode is se-

lected from the call channel,
a small “c” appears instead
of memory channel number. 

Small “c” shows VFO was 
selected from the call channel.