ICOM 269800 Manual De Usuario

68

12

OTHER FUNCTIONS

■ Partial reset

If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing
the memory contents, a partial resetting function is available
for the transceiver.

➥ Turn power OFF, if transeciver is powered ON.

➥ While pushing [V/MHz

], turn the power ON to par-

tially reset the transceiver.

■ All reset

The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.

If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.

• Partial resetting is also available. See left for details.

Resetting the transceiver CLEARS all memory information
and initializes all values in the transceiver.

➥ While pushing [SET

] and [S.MW

], turn the

power ON to reset the CPU.

[PWR]

[S.MW 

MW

]

[PWR]