ICOM 272103 Manual De Usuario
7
2
PANEL DESCRIPTION
■
Programmable function keys
The following functions can be assigned to
[UP], [DOWN],
[P0], [P1], [P2], [P3], [RED] and [MONITOR] programmable
function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.
CH UP AND DOWN KEYS
➥
➥
Push to select an operating channel.
➥
Push to select a transmit code channel after pushing [TX
Code CH Select].
➥
Push to select a DTMF channel after pushing [DTMF
Autodial].
➥
Push to select a scan group after pushing and holding
[Scan A Start/Stop]/[Scan B Start/Stop].
➥
Push to select a BIIS code, status number or SDM after
pushing [Digital].
➥
Push to select the MDC menu after pushing [MDC CALL].
➥
Push to select the desired transceiver alias or message
channel while in the transceiver alias or message channel
selection mode.
selection mode.
BANK SELECT KEY
Push this key, then push [CH Up] or [CH Down] to select the
desired bank.
Push this key, then push [CH Up] or [CH Down] to select the
desired bank.
SCAN A KEY
➥
➥
This key’s operation depends on the Power ON Scan set-
ting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning. Scanning resumes after pass-
Push to pause scanning. Scanning resumes after pass-
ing a specified time period. In case of transmission during
scan, pauses scanning. Scanning resumes after passing
a specified time period specified.
scan, pauses scanning. Scanning resumes after passing
a specified time period specified.
➥ Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the
desired group.
desired group.
SCAN B KEY
➥
➥
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning
resumes after passing a specified time period.
resumes after passing a specified time period.
➥
Push and hold this key for 1 sec. to indicate the scan group,
then push [CH Up] or [CH Down] to select the desired group.
SCAN TAG KEY
Push to add or delete the selected channel to the scan group.
Push to add or delete the selected channel to the scan group.
PRIORITY CHANNEL KEYS
➥
➥
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] to rewrite the Prio A
channel.