ICOM 272103 Manual De Usuario

16

4

■

The following functions are assigned to each programmable 
key as the default. However, the assigned function can be 
changed by your dealer. Ask your dealer for details.

  NOTE: [TX Code Enter] must be assigned to any key.

[P0]; Call 

:  Push to transmit a 5-tone/BIIS call 

when  the  selected  channel  is  a 
5-tone or MSK channel, respec-
tively.

[P1]; Digital 

:  Push to select the call list ID/trans-

mit  message,  or  to  display  the 
receive message record for selec-
tion.

[P3]; TX Code Enter 

:  Push to enter the direct ID code 

edit  mode  for  both  5-tone  and 
MSK.

[UP]/[DOWN]; CH Up/Down
 

:  While  in  the  standby  condition, 

selects the operating channel.

 

   After pushing [Digital] or [TX Code 

CH Select], selects call list or TX 
code channel, respectively.

[MONITOR]; Moni(Audi):  Push this key after the communica-

tion to send a ‘Clear down’ signal 
during MSK channel operation.

[P2]/[RED]; Null 

: No function is assigned.

■

D Individual call

q

 When an individual call is received;

  • Beeps sound.
  • “ ” appears and the mute is released.
  •  The programmed text message (e.g.“

”) and the call-

ing station ID (or text) is displayed alternately, depending on the 
setting.

  • “

” appears or blinks depending on the setting.

w

  Push and hold [PTT], then speak into the microphone at 

a normal voice level.

  • “

” indicator appears.

e

 Release [PTT] to return to receive.

  • “

” appears while receiving a signal.

r

  To finish the conversation, push [MONITOR] (Moni(Audi)) 

to send the ‘Clear down’ signal. 

  • Either station can send a ‘Clear down’ signal.
  • “

” is displayed for 2 sec. (approx.).

  •  “ ” disappears and the transceiver returns to the standby con-

dition.

Appears or blinks

Appears