ICOM 272105 Manual De Usuario
23
4
BIIS OPERATION
■ Transmitting an SDM
D
D General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
D
D Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then
push [UP] or [DOWN] to select the desired station/group
code.
code.
w Push [P1] (Digital) again, then push [UP] or [DOWN] to
select the desired SDM.
Or, you can select the desired SDM using [Status
Up]/[Status Down] key directly.
Up]/[Status Down] key directly.
e Push [P0] (Call) or [PTT]* to transmit the SDM to the
selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
SDM is displayed.
IC-F43GT_GS.qxd 04.4.9 1:10 PM Page 23 (1,1)