ICOM 279501 Manual De Usuario
Push for 1 sec.
U.S.A. channels
International channels
Canadian channels*
8
4
BASIC OPERATION
D U.S.A., International and Canadian channels
The IC-M90 has 57 U.S.A., 57 International and 61 Canadian
channels. These channel groups may be specified for the op-
erating area.
channels. These channel groups may be specified for the op-
erating area.
q Push [CH/WX•
U/I/C/L
] to select the regular channel.
• If the weather channel appears, push [CH/WX•
U/I/C/L
] again.
w Push [Y]/[Z] to select a channel.
• “DUP” appears for duplex channels.
e To change the channel group, push [CH/WX•
U/I/C/L
] for 1
sec.
• U.S.A., International and Canadian channels can be selected in
sequence. Depending on the setting, LAND channel can be se-
lected. See the “LAND CHANNEL OPERATION” on p. 15 for de-
tails.
lected. See the “LAND CHANNEL OPERATION” on p. 15 for de-
tails.
D Weather channels
The IC-M90 are 10 weather channels. They are used for
monitoring weather channels from the NOAA (National
Oceanographic and Atmospheric Administration) broadcasts
(reception of weather channels possible in U.S.A. only).
monitoring weather channels from the NOAA (National
Oceanographic and Atmospheric Administration) broadcasts
(reception of weather channels possible in U.S.A. only).
q Push [CH/WX•
U/I/C/L
] to select the weather channel group.
w Push [Y]/[Z] to select a weather channel.
e Push [CH/WX•
e Push [CH/WX•
U/I/C/L
] to return to the condition before se-
lecting the weather channel group.
✔
CONVENIENT!
The IC-M90 can detect a weather alert tone on the
selected weather channel while in another channel (when the
power save function is turned ON) or during scanning. See
the “SET mode items” on p. 17 for details.
selected weather channel while in another channel (when the
power save function is turned ON) or during scanning. See
the “SET mode items” on p. 17 for details.
Push
IC-M90.qxd 04.8.23 3:53 PM Page 8