ICOM 279501 Manual De Usuario
21
8
SET MODE
8
D VOX gain “ga”
Adjusts the VOX gain (from 1 to 6) to turn transmitting auto-
matically when speaking with the optional headset.
matically when speaking with the optional headset.
• In case of setting to 1, the VOX gain sets to dulling.
• In case of setting to 6, the VOX gain sets to sharpening.
• In case of setting to 6, the VOX gain sets to sharpening.
D VOX delay “dL”
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps)
that keeps on transmitting after you stop speaking.
that keeps on transmitting after you stop speaking.
• In case of setting to 0.5 (0.5 sec.), the VOX delay sets to short.
• In case of setting to 3.0 (3.0 sec.), the VOX delay sets to long.
• In case of setting to 3.0 (3.0 sec.), the VOX delay sets to long.
SET MODE LIST
*default setting
Push
VOX gain 3 (default)
VOX gain 6
Push
VOX delay 1.0 (default)
VOX delay 3.0
Function
Indication
Switch
Beep tone function
“bP”
OFF/ON*/US
Weather alert function
“AL”
OFF*/ON
Priority scan function
“Pr”
OFF*/ON
Scan resume timer
“St”
OFF*/ON
Auto scan function
“AS”
OFF*/ON
Dual/Tri-watch function
“dt”
Dual*/Tri
Monitor switch action
“Sq”
Push*/Hold
Backlighting function
“bL”
OFF/1/2/3*
LCD contrast selection
“LC”
1/2/3*/4
Auto power save function
“PS”
OFF/ON*
Self check function
“SC”
OFF*/ON
Battery voltage indicator
“bt”
OFF*/ON
Signal strength indicator
“SI”
OFF*/ON
Squelch sensitivity
“SS”
OFF*/ON
Scrambler code
“cd”
1*/2/· · ·/31/32
VOX gain
“ga”
1/2/3*/4/5/6
VOX delay
“dL”
0.5/1.0*/1.5/2.0/2.5/3.0
IC-M90.qxd 04.8.23 3:53 PM Page 21