ICOM 297000 Manual De Usuario
V
D Remote installation
The supplied remote controller bracket is used for remote in-
stallation.
stallation.
• Attach the remote controller
bracket onto a flat surface
using with 4 self-tapping
screws
using with 4 self-tapping
screws
(2.6 mm(d))
, or double-
sticky tape, etc., as at left,
then attach remote controller
to the bracket
then attach remote controller
to the bracket
Hint!
The supplied remote controller bracket may fits to a mount-
ing angle, such as for car TV set as below. Ask your car ac-
cessory shop, if desired.
The supplied remote controller bracket may fits to a mount-
ing angle, such as for car TV set as below. Ask your car ac-
cessory shop, if desired.
D Battery connection
☞ RWARNING NEVER remove the fuse holders from the
DC power cable.
☞ NEVER connect the transceiver directly to a 24 V battery.
☞ DO NOT use the cigarette lighter socket for power con-
nections. (See p. ?? for details)
Attach a rubber grommet when passing the DC power cable
through a metal plate to prevent a short circuit.
through a metal plate to prevent a short circuit.
• CONNECTING TO A DC POWER SOURCE
IC-2820H
Fuses
20 A
20 A
black
red
⊕
−
12 V
Grommet
NOTE:
Use terminals for the
cable connections.
Use terminals for the
cable connections.
WARNING!
NEVER
remove the
fuse holders.
NEVER
remove the
fuse holders.
Crimp
Solder
12 V
battery
battery
Supplied
DC power cable
DC power cable
+ red
_ black
Remote controller bracket
QUICK REFERENCE GUIDE