ICOM 297000 Manual De Usuario

43

5

MEMORY OPERATION

[EXAMPLE]: Programming the bank name “AIR” into the scan edge channel 3A.

Enter  “I” and “R” with      (Main 

band's) and           (Left band's), then 

push           (Right band's) to select 

memory write mode.  

Push and hold           (Left band's) for 1 sec. to program. 

Push            (Main band's) to select memory mode.

Rotate            (Main band's) to select scan edge 
channel 3A.

Rotate            (Main band's) to select 
“A”, then push           . 

Push and hold            (Main band's) for 1 sec. 
to enter select memory write condition.

Push           (Main band's) several times 
to select “B NAME”.

Push           (Right band's) to enter bank 
name edit mode.

*Select “M NAME” or “S NAME” when programing the memory name or the 

  scan name, respectively.

Bank name edit mode

Select memory write mode

Memory mode

SEL

EDIT

D

D To indicate the channel name

The channel name indication can be set independently for
each memory channel.

q Select the desired memory channel in the main band.

➥ Push the same band’s [M/CALL•MW] several times to

select memory mode, then rotate the same band’s [DIAL]
to select the desired memory channel.

• “X” and memory channel number appear.

w Push [F•

] to display the function guide.

e Push [M.N](LOW•PRIO) several times to select “MEM-

ORY,” “FREQ” or OFF.

• When “MEMORY” is selected, the programmed memory name is

indicated above frequency indication; when “FREQ” is selecte,
the programmed memory name is indicated at the frequency in-
dication and the programmed frequency is indicated above the
memory name.

r Push [F•

] twice to exit the function guide.

NOTE: When no memory name is programmed, the stored
frequency is displayed.