ICOM 305400 Manual De Usuario
51
8
CONNECTIONS AND MAINTENANCE
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
n
Optional MB-69 installation
An optional MB-69
flush
mount
is available for mounting
the transceiver to a flat surface such as an instrument panel.
CAUTION: KEEP the transceiver and microphone at least
1 meter away from your vessel’s magnetic navigation
compass.
compass.
q
Using the template on page 55, carefully cut a hole into
the instrument panel (or wherever you plan to mount the
transceiver.)
the instrument panel (or wherever you plan to mount the
transceiver.)
w
Slide the transceiver through the hole as shown below.
e
Attach the clamps on either side of the transceiver with 2
supplied bolts (5 × 8 mm).
supplied bolts (5 × 8 mm).
• Make sure that the clamps align parallel to the transceiver body.
r
Tighten the end bolts on the clamps (rotate clockwise) so
that the clamps press firmly against the inside of the in-
strument control panel.
that the clamps press firmly against the inside of the in-
strument control panel.
t
Tighten the locking nuts (rotate counterclockwise) so that
the transceiver is securely mounted in position as below.
the transceiver is securely mounted in position as below.
y
Connect the antenna and power cable, then return the
instrument control panel to its original place.
instrument control panel to its original place.
t
r