ICOM 307300 Manual De Usuario
N Speech compressor
<MODE> SSB
The speech compressor increases average RF output
power, improving signal strength and readability.
The speech compressor increases average RF output
power, improving signal strength and readability.
q Push [SSB] to select USB or LSB mode.
w Push and hold [COMP] (MF7) for 1 sec. to select
COMP TBW set screen.
e Adjust the [MIC GAIN] control so that the ALC
meter reads within the ALC zone, whether or not
you speak softly or loudly.
you speak softly or loudly.
t Push [COMP] to turn the speech compressor ON.
r While speaking into the microphone, rotate the
main dial , so that the COMP meter reads within
the COMP zone (10 to 20 dB range) for your nor-
mal voice level.
the COMP zone (10 to 20 dB range) for your nor-
mal voice level.
When the COMP meter peaks exceed 20 dB,
your transmitted voice may be distorted.
your transmitted voice may be distorted.
t Push [COMP] (MF7) or [EXIT/SET] to exit COMP
TBW set mode.
y Adjust the ALC meter reading within the 30 to 50%
range of the ALC scale. (p. ??)
N Transmit filter width setting
<MODE> SSB
The transmit filter width for SSB mode can be
selected from wide, middle and narrow.
The transmit filter width for SSB mode can be
selected from wide, middle and narrow.
q Push [SSB] to select USB or LSB mode.
w Push and hold [COMP] (MF7) for 1 sec. to select
COMP TBW set screen.
t Push [COMP] to turn the speech compressor ON
or OFF.
t Push [TBW] (F-3) several times to select the
desired transmit filter width from wide, middle and
narrow.
narrow.
•
The filter can be independently set on the speech com-
pressor function is ON and OFF.
pressor function is ON and OFF.
•
The following filters are specified as the default. Each
of the filter width can be re-set in level set mode.
(p. ??)
of the filter width can be re-set in level set mode.
(p. ??)
WIDE : 100 Hz to 2.9 kHz
MID : 300 Hz to 2.7 kHz
NAR : 500 Hz to 2.5 kHz
t Push [COMP] (MF7) or [EXIT/SET] to exit COMP
TBW set mode.
[MIC GAIN]
[COMP]
EXIT/SET
Main dial
SSB
• COMP/TBW set screen
[COMP]
EXIT/SET
F-3
TBW
SSB
Speech compressor is ON
Speech compressor is OFF
“WIDE” setting
86
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21