ICOM 318002 Manual De Usuario

12

2

BASIC OPERATION

■

The voice scrambler function provides private communica-
tion between stations. All versions have a built-in frequency 
inversion type scrambler, moreover, the optional Rolling or 
Non-rolling type can be available.

q

 Push [Scrambler] to turn the scrambler function ON.

  • “

” (Scrambler indicator) appears.

w

  Push [Scrambler] again to turn the scrambler function 

OFF.

  • “

” disappears.

■

The emergency call can be performed using [Emergency]. (p. 5)
When [Emergency] is pushed for the specified time period, 
the DTMF or 5-tone emergency signal is transmitted once 
or repeatedly on the emergency channel depending on the 
channel. However, when no emergency channel is specified, 
the signal is transmitted on the previously selected channel.

If you want to cancel the emergency call, push and hold the 
key again before transmitting the call.

Emergency call is also available with the MDC 1200 signal-
ing system. (p. 13)

■

When the specified ID, set as a stun ID or kill ID, is received, 
the stun function is activated.
When the stun ID is received, the transceiver becomes 
unusable. Entering of the password (p. 8) or receiving a 
specified ID, set as a revive ID, is necessary to operate the 
transceiver again in this case.
When the kill ID is received, the transceiver switches to 
the cloning required condition. Cloning the transceiver is 
necessary to operate the transceiver again in this case.

Stun function is also available with the MDC 1200 signaling 
system. (p. 13)

■

When one of the following operations is performed, the 
transceiver selects the Priority A channel automatically.

• Turning the power ON
   The Priority A channel is selected each time the trans-

ceiver power is turned ON.

• Off hook.
   The Priority A channel is selected when the microphone is 

took off from its hanger.