ICOM 318200 Manual De Usuario

Push to turn the Noise Blanker ON or OFF. The
Noise Blanker reduces pulse-type noise such as
that generated by vehicle ignition systems. The
Noise Blanker cannot be used in the FM mode,
and is not effective for non-pulse-type noise.

screen. Push to return to the previous screen
display.

(outer control; p. 60)

Rotate to adjust the noise blanker threshold level
when the Noise Blanker is ON. Set for maximum
readability.

!7).

Increases

Decreases

!9 NOISE REDUCTION LEVEL CONTROL [NR]

(inner control; p. 61)

Rotate to adjust the DSP noise reduction level
when the Noise Reduction is ON. Set for maximum
readability.

@0).

Increases

Decreases

@0 NOISE REDUCTION SWITCH [NR] (p. 61)

@1 TX INDICATOR

Lights red while transmitting.

@2 FUNCTION SWITCHES [F1]–[F5] (pp. 13, 14)

Push to select the function which is indicated on the
LCD display above each switch.

and the operating mode.

@3 MENU SWITCH [MENU] (pp. 13, 14)

± Push to change the set of functions assigned to

switches ([F-1] to [F-5]).

and M2 (Menu 2).

Push to return to the previous screen display.

@4 MODE SWITCHES

Push to select your desired operating mode. (p. 31)

mode when the “SPEECH [MODE] SW” item is set to
“ON” in the Set mode. (p. 87)

± Push to alternately select the USB or LSB

modes.

± In

the

SSB mode, hold down for 1 second to se-

lect

the

SSB data mode (USB-D, LSB-D).

D” appears in addition to “USB” or “LSB.”

± In the SSB data mode, push to return to the nor-

mal SSB mode.

[CW]

Push to alternately select

the

CW and CW-R

(CW

reverse)

modes.

N Front panel (continued)

PANEL DESCRIPTION

@5 @6 @7 @8 @9

!9 !8 !7