ICOM 318200 Manual De Usuario
48
4
RECEIVE AND TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D
The RTTY Set mode is used to set the mark and shift
frequencies, keying type, decode USOS function,
RTTY decoder new line code and the number of de-
code screen display lines.
frequencies, keying type, decode USOS function,
RTTY decoder new line code and the number of de-
code screen display lines.
s
q In the RTTY mode, push [MENU] to display the “M1”
screen (Menu 1).
w Push [RTTY](F-4) to display the “RTTY” screen.
e Push [SET](F-5) to enter the RTTY Set mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [DIAL] to select the desired option.
s
ting, if desired.
y Push [MENU] to save, and return to the “RTTY”
screen.
u Push [MENU] again to return to the “M1” screen.
2449
1.
$EFAULT
Select the RTTY mark frequency.
s
2449
2.
$EFAULT
Select the RTTY frequency shift.
s
2449
3.
$EFAULT
Select normal or reverse keying polarity.
s
$ECODE
4.
$EFAULT
Turn the USOS (UnShift On Space) function ON or
OFF. This function decodes a letter code after receiv-
ing a “space.”
OFF. This function decodes a letter code after receiv-
ing a “space.”
s
$ECODE
5.
$EFAULT
Select the internal RTTY decoder new line code.
CR: Carriage Return, LF: Line Feed
CR: Carriage Return, LF: Line Feed
s
CR+LF code.
$ECODE
6.
$EFAULT
Set the decoder screen display mode to 2 or 3 lines.
1
2 1 2 5
SET
RTTY
Mark
Freq
Select the item
Reset to the default
setting
setting