ICOM 318200 Manual De Usuario
64
6
FUNCTIONS FOR TRANSMIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N
-ODE
q Push [SSB] to select the USB or LSB mode.
w Rotate the [MIC] control to adjust the microphone
gain so the ALC meter reads within the ALC zone,
whether or not you speak softly or loudly.
whether or not you speak softly or loudly.
e Push [COMP] to turn ON the Speech Compressor
function.
s
r While speaking into the microphone at your normal
voice level, rotate the [COMP] control to adjust the
compressor level so the COMP meter reads within
the COMP zone.
compressor level so the COMP meter reads within
the COMP zone.
s
ting, if desired.
When the COMP meter peaks above the COMP
level zone, your transmitted voice may be dis-
torted.
torted.
N
-ODE
q Push [SSB] to select the USB or LSB mode.
w Push [MENU] to display the “M1” screen (Menu
1), then hold down [TBW](F-4) for 1 second, one
or more times, to select a Wide, Mid or Narrow
transmission passband width.
or more times, to select a Wide, Mid or Narrow
transmission passband width.
s
TX filter width for approximately 1 second.
s
of the filter widths can be set in the Tone Control Set
mode. (pp. 90, 91)
mode. (pp. 90, 91)
- WIDE : 100 Hz to 2900 Hz
- MID : 300 Hz to 2700 Hz
- NAR : 500 Hz to 2500 Hz
Hold down
The selected transmit filter width is
displayed for approximately 1 second.
displayed for approximately 1 second.
[SSB]
[COMP]
[COMP] control
[MIC] control
Appears
COMP level zone
COMP meter
A G C
T B W
S C P
M 1
[SSB]
[TBW]
A G C
T B W
S C P
M 1
A G C
T B W
S C P
M 1
T B W W I D E