ICOM 329600 Manual De Usuario
2001 NEW
7
1
PANEL DESCRIPTION
2001 NEW
q
DATA JACK [DATA]
Connects to a PC through an RS-232C cable (D-
sub 9-pin) for remote control in the RS-232C for-
mat.
sub 9-pin) for remote control in the RS-232C for-
mat.
w
GPS CONNECTOR [GPS]
Connects to a GPS receiver to automatically set
your position and time data from data in NMEA0183
ver. 2.0 or 3.01 formats.
your position and time data from data in NMEA0183
ver. 2.0 or 3.01 formats.
e
GPIO CONNECTOR [GPIO]
Connects to the control cable of the optional AT-
140 Antenna Tuner or AT230 Automatic Tuning An-
tenna.
140 Antenna Tuner or AT230 Automatic Tuning An-
tenna.
q
USB CONNECTOR [USB]
Connects to a PC through an A-B type USB cable.
w
ACCESSORY CONNECTOR 2 (12 PIN) [ACC2]
e
ACCESSORY CONNECTOR 1 (10 PIN) [ACC1]
Connects to the IC-F8100’s Accessory connectors.
Both connectors must be connected to use this
Junction Box.
Both connectors must be connected to use this
Junction Box.
r
GROUND TERMINAL
IMPORTANT! Connects to a solid ground point.
t
EXTERNAL MODEM CONNECTOR [EXT. MODEM]
Connects to an external unit such as an HF email
modem or TNC (Terminal Node Controller).
NOTE: This connector may not be available, de-
pending on the AD-119’s version.
q
w
e
■
AD-119 Optional Junction Box
D
Front Panel
q
t
w
e
r
D
Rear Panel