ICOM 333202 Manual De Usuario

17

3

CONNECTION AND MAINTENANCE

■

A key element in the performance of any communication sys-
tems is its antenna. Contact your dealer for more information 
regarding antennas and how to install them.

■

A fuse is installed in each fuse holder of the supplied DC 
power cable*. If a fuse blows or the transceiver stops func-
tioning, track down the source of the problem if possible, re-
paire it and then replace the damaged fuse with a new rated 
one.

*Depending on version, only one fuse holder may be attached.
❑

Fuse rating: 10 A (for one fuse holder)/20 A (for Two fuse holders)

 

USE the applicable fuse only.

■

If the transceiver becomes dusty or dirty, wipe it clean with a 
soft, dry cloth.

 DO NOT use harsh solvents such as benzine or 
alcohol, as they will damage the transceiver sur-
faces.

■

dc

 

power

 

cable

  Two fuse holders are attached. 

USE the 20 A fuse only.

   OPC-1132A: 3 m (9.8 ft) 
  OPC-347: 7 m (23 ft)
• OPC-1939/OPC-2078 

acc

 

cable

 Allows you to connect to an external terminal.
  OPC-1939: D-sub 15-pin, OPC-2078: D-sub 25-pin
•

hand

 

microphone

  HM-152  :  Hand microphone
  HM-152T : DTMF microphone
  HM-148G :  Self ground heavy duty microphone
•

desktop

 

microphone

•

external

 

speaker

  Input impedance  : 4 ø
 SP-22  : Rated input; 5 W, Max. input; 7 W
 SP-30  : Rated input; 20 W, Max. input; 30 W

Approved Icom optional equipment is designed for optimal perfor-
mance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an Icom 
transceiver in the event the Icom transceiver is used with equipment 
that is not manufactured or approved by Icom.